How to Install Android 4.4.2 PAC-man ROM via ClockworkMod (CWM) Recovery

Interested users can follow our step-by-step guide to install the latest Android 4.4.2 KitKat update via PAC-man ROM on the Galaxy S2 I9100G. IBTimes UK reminds its readers that it will not be held liable for any damage to device during or after firmware installation. Users are advised to proceed at their own risk.

How to Install Android 4.4.2 PAC-man ROM via ClockworkMod (CWM) Recovery

• Power off the phone and wait for 5 to 10 seconds until the device shuts down completely.
• Now press and hold Volume Up, Home and Power buttons together until the Galaxy S3 logo appears on screen and the device boots into Recovery mode. NOTE: In recovery mode, use Volume keys to navigate between options and Power key to select the desired option.
• Perform Wipe data/Factory reset (this will delete all apps and their settings and game progress) and choose Yes on next screen to confirm the action. Then perform Wipe Cache Partition and once again hit Yes to confirm.
• Return to CWM recovery main menu and select Mounts and Storage> Format / data and click Yes on next screen to confirm.
• From the main menu of CWM recovery, go to Advanced and choose Wipe Dalvik Cache. Then hit Yes on next screen to confirm. Then Fix File Permissions via recovery (check video below):

• Select Install Zip from sdcard and then click Choose zip from sdcard. Browse to the location of the Pac-Man ROM firmware file which you copied earlier to your phone's SD card. Choose Yes on next screen to confirm the ROM installation.
• Repeat the previous step to install Google Apps as well.
• Once Google Apps is also installed, select "+++++Go Back+++++"and reboot the device by tapping reboot system now from the recovery menu. Your Galaxy S3 will restart and it may take about 5 minutes for first boot. So, do not interrupt the process.
• Your Galaxy S2 I9100G is now running on Android 4.4.2 KitKat via Pac-Man ROM. Go to Settings > About Phone to verify the firmware installed.

NOTE: If the device gets stuck at boot loop (while rebooting), then just do a factory reset from recovery mode to fix the issue.

Source : ibtimes